Peerless-AC
4 Sim cellular and Wi-Fi dual band Router

Peerless-AC is a device for network uplink and downlink aggregation. It allows users to combine up to 4 Cellular networks (2.5G, 3G and 4G) along with Wi-Fi dual band MU-MIMO 802.11ac with Gigabit LAN and WAN.

It is a very light weight, compact, IP65 design that can be mounted outdoor, on trains or other transport or even work in airborne applications like Drones.

Four simultaneously operational LTE Category 4 modems, can provide speeds up to 1200 Mbps with load balancing feature. 2 x auto sensing 10/100/1GbE Ethernet ports with PoE PD and PSE capability, Wave-2 802.11ac Dual Band WiFi at 867+400Mbps with excellent routing functions in the software and security features make this the perfect high availability solution for any mission critical requirement.

Request for Datasheet

Variant

Product Highlights

  • Extremely compact size with rugged Industrial design
  • Facility to plug upto 4 x 4G SIMs for simultaneous communication of data over 4 channels
  • Two directional aggregation – Download/upload
  • Support DL 3x carrier aggregation and 256QAM
  • Worldwide LTE-A and UMTS/HSPA+ coverage
  • Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
  • Ethernet to GPRS/EDGE/UMTS/HSPA/LTE
  • GPS/Glonass/Beidou/Galileo/QZSS supported to provide location information
  • Transparency of which channel or media is being used by applications using Internet
  • Zero configuration – automatically detect the ISP and connect to the cellular network

Specification

System

CPU

Quad-core ARM

RAM

256 MB, DDR3

FLASH memory

16MB SPI NOR and 4GB eMMC

Software

Configuration

Web UI via Wi-Fi or LAN

Routing

Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)

NetSnapper (optional)

Mobile connection management, data compression VPN client (not available in standard FW)

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)

VoIP passthrough support

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring

Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall

Port forwards, traffic rules, custom rules

DHCP

Static and dynamic IP allocation, DHCP Relay, Relayd

QoS

Traffic priority queuing by source/destination (planned), service (planned), protocol or port (planned), WMM, 802.11e

DDNS

Supported >25 service providers, others can be configured manually

Network backup

VRRP, Mobile, Wired and Wi-Fi WAN options, each of which can be used as an automatic Failover

Load balancing

Balance Internet traffic over multiple WAN connections

SSHFS (optional)

Possibility to mount remote file system via SSH protocol (not available in standard FW)

VPN specifications

OpenVPN

Multiple clients and a server can run simultaneously, 12 encryption methods

OpenVPN Encryption

DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec

IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)

GRE

GRE tunnel

PPTP, L2TP

Client/Server instances can run simultaneously

Stunnel

Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN

Method of building scalable IPsec VPNs

SSTP

SSTP client instance support

Modbus function

Modbus TCP slave

ID filtering: Respond to one ID in range [1;255] or any

Allow remote access: Allow access through WAN

Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality

Modbus TCP master

Supported functions: 01, 02, 03, 04, 05, 06, 15, 16

Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MQTT gateway

Gateway Allows sending commands and receiving data from Modbus Master trough MQTT broker

Modbus data to server

Protocols HTTP(S), MQTT, Azure MQTT (planned)

Management

WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA

Firmware update from server, automatic notification

SSH

SSH (v1, v2)

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET

CALL

Reboot, Status, Mobile data on/off, Output on/off

TR-069

OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT

MQTT Broker, MQTT publisher

SNMP

SNMP (v1, v2, v3), SNMP trap

JSON-RPC

Management API over HTTP/HTTPS

Modbus

Modbus TCP status/control

Remote management

Zabbix remote management

Security

Authetication

Pre-shared key, digital certificates, X.509 certificates

Firewall

Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention

DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN

Port based and tag based VLAN separation

Mobile quota control

Custom data limits for all SIM cards

WEB filter

Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control

Flexible access control of TCP, UDP, ICMP packets, MAC address filter

Wireless specifications

Standard

GSM/ GPRS/ EDGE/ UMTS/ HSPA+/ SCDMA/ LTE

LTE Module

Four LTE-A Category 4 modules

Antennas/ SIM card

2 (4G) per channel. Internal SIM card slot (x4)

SIM/mobile module switch

Up to 4 SIM cards, two for each mobile module, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

SIM

4 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders

Wi-Fi Standard

802.11p, 802.11ac Wave 2, 802.11a/b/g, 802.11n.

Wi-Fi specific

802.1r for fast roaming with security enabled

802.1k for radio resource management

802.1s Wi-Fi Mesh network, with additional features to dynamically control 802.1s Proactive PREQ time interval

MAC Address Authentication

X.509 Digital Certificates for WPA2 Band Steering Function

Wi-Fi Function

Mesh/AP/Client/Bridge (WDS)

Wi-Fi Spectral Bands

2.4 GHz, 5 GHz

Wi-Fi Peak Speed

1.2 Gbps

Wi-Fi Channel Utilisation

5/10/20/40/80 MHz

Wi-Fi Transmit Power

Up to 23DBm

MIMO Configuration

2×2 DBDC (2-spatial streams)

Wi-Fi Features

MU-MIMO

Wireless Antennas

4 x SMA for LTE, 4 x RP-SMA for Wi-Fi

Ethernet Interfaces

LAN Ports

2 No. 10/100/1000 Base-T PoE supporting PD/PSE LAN Ports with auto-negotiation speed, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto
MDI/MDIX

WAN Ports

WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Location

GNSS

GPS, GLONASS, BeiDou, Galileo and QZSS

Coordinates

GNSS coordinates via WebUI, SMS, Zabbix

NMEA

NMEA 0183

Server software

Zabbix

Mobile Network Geolocation

Get approximate device location on Zabbix based on mobile cell tower position (without using GPS)

Geofencing

Configurable multiple geofence zones

GNSS Antennas

2 x SMA for GNNS

Power

Input Voltage

12-24 VDC

Connector

4 pin industrial lockable terminal block

Power Consumption

2.5-3A @ 12VDC (30-36W)

Reverse Polarity Protection

Yes

Alternate Power

Power over PoE, 802.3af input

Wireless specifications

Color

State

Description

POWER

Green

ON

OFF

PWR is connected

PWR is disconnected

RUN

Green

ON

OFF

System is booted up and running

System is still booting up or powered off

Wifi 2.4

Green

ON

Blinking

OFF

Interface is enabled

Data is being transmitted/received over Wi-Fi 2.4

Interface is disabled

Wifi 5.0

Green

ON

Blinking

OFF

Interface is enabled

Data is being transmitted/received over Wi-Fi 5.0

Interface is disabled

Signal Strength (5 LEDs) per channel

Blue

ON

OFF

1st LED signal >0%; <20%… 5thLED sign >80%<=100

Doesn’t meet the signal conditions

DI/DO

Green

Blinking

Blinking

Based on data

Based on data

LAN/WAN (1000Mbps)

Green

ON

Blinking

OFF

Ethernet is linked at 1000Mbps

Ethernet is active and data is being transmitted

Ethernet is not linked

LAN/WAN (10/100Mbps)

Amber

ON

Blinking

OFF

Ethernet is linked at 10/100Mbps

Ethernet is active and data is being transmitted

Ethernet is not linked

Digital Inputs/Outputs

Digital Input

1 channel Photo-couple isolated Digital Input

Digital Output

1 channel NO (0.5~1A@24VDC)

Connector

3 pin Industrial lockable terminal block

Environmental limits

Operating Temperature

-40°C~70°C (-40°F~158°F)

Storage Temperature

-40°C~85°C (-40°F~185°F)

Ambient Relative Humidity

5 % to 95 % non-condensing

Mechanicals

Housing

IP65 protection, metal housing

Dimensions(W x H x D)

310.7mm x 265.2mm x 58mm

Weight

2.5 kg

Installation

DIN-Rail or Wall-Mount (optional kit)

Reset Button

Yes

Ordering Information

Peerless-AC

802.11ac 2×2 MU-MIMO Router

Peerless-AC-2

802.11ac 2×2 MU-MIMO with 2 SIM LTE Cat 4 Router

Peerless-AC-4

802.11ac 2×2 MU-MIMO with 4 SIM LTE Cat 4 Router